Features 
 ? Large color LCD touch interactive microcomputer control system, easy to understand, running at a glance; 
 ? Controller friendly interface and easy procedure setting, abnormal and troubleshooting display complete; 
 ? With RS-232 or RS-485 communication interface, can be connected to the computer remote control, easy to use; 
 ? Running at boot time to automatically make an appointment in advance pre-registration, pre, standby; 
 ? Can set the number of defrost cycles and automatic (manual) defrost; 
 ? Closed imported compressor + environmentally friendly refrigerant, cold plate heat exchanger and dual-type ultra-low temperature refrigeration systems; 
 ? Post test hole can be applied load wiring test components; 
 ? Can choose three-or two-box-type boxes; 
 ? A box-type sub-high temperature, low temperature, three-part test area, test samples placed on the test area, the sample completely still, the use of unique animal heat, storage structures, forced hot air duct means to switch into the test area to complete the cold temperature impact test ; 
 ? Three-box can be set individually heat, cold and hot and cold conditions, the impact of three different functions, the implementation of hot and cold conditions, you can choose 2 or 3 tank features tank and has the function of high and low temperature testing machine. 

 Use 
 ? Screening electronic components, materials, finished the initial failure; 
 ? For electronics, electrical products and other military settings in the surrounding air temperature under the conditions of rapid change adaptation test. 

 One. Performance Specifications 
 A: Model: TS5505-3 
 B: Performance: refers to the air-cooled at room temperature +25 ℃, no-load 
 1. Test cell temperature range: -55 ℃ ~ 150 ℃ 
 2. Temperature bath temperature setting range: +60 ℃ ~ +200 ℃ 
 High-temperature heating time slot: RT (room temperature) ~ +200 ℃ about 35min (room temperature when the +10 ~ +30 ℃) 
 3. Cryogenic tank temperature setting range: -70 ℃ ~ -10 ℃ 
 Time slot cooling temperature: RT (room temperature) ~ -70 ℃ about 95min (room temperature when the +10 ~ +30 ℃) 
 4. Temperature Fluctuation: ± 1.0 ℃ 
 5. Temperature uniformity: ± 2.0 ℃ 
 6. The impact of normalized complex time: -55 ~ +150 about 5min (plastic IC load 2.5KG) 
 (High and low temperature impact over time, each for 30min) 
 II. System structure: 
 a: Internal Dimensions: W50 × H35 × D35 cm 
 b: External Dimensions: W129 × H165 × D129 cm 
 1. Inside the box Material: stainless steel plate (SUS # 304) 
 2. Outside the box Material: stainless steel processing lines (SUS # 304). 
 3. Insulation Material: High slots: cotton, aluminum silicate insulation 
 Cryogenic tank: High density PU foam 
 4. Heater: Stainless steel fin cooling tube heater. 
 a: high-temperature trough 5.5KW. 
 b: low-temperature trough 3.8KW. 
 5. Air circulation system: a. Motor 1HP × 2 units 
 b. Stainless steel shaft extension 
 c. Multi-wing fan (SIROCCO FAN) 
 e. specially designed fan forced air circulation system 
 6. Door: single chamber door, left open 
 a. handle embedded plane 
 b. After the button: SUS # 304 
 c. silicone foam strip 
 7. Refrigeration system: 
 a. Compressor: France Taikang Fully enclosed high-efficiency compressor 
 b. Refrigerant: environmentally friendly refrigerant R-507/R-23. 
 c. Condenser: air-cooled condenser 
 d. Evaporator: Finned multi-stage automatic load capacity adjustment 
 e. Accessories: desiccant, oil separator, refrigerant flow windows, repair cutting, high-pressure protection switch 
 f. Expansion System: Automatic volume control of the refrigeration system 
 g. cooling auxiliary parts: expansion valve (Denmark "DANFOSS"), solenoid valve (Japan); filters (Denmark "DANFOSS"); pressure controller (Denmark "DANFOSS"); cut-off valve (Italy CASTEL); oil separator (Europe ALCO) and other cooling accessories are imported. 
 8. Process controller: imported color LCD touch screen Ying button controller directly, in English and that 7.5 "graphics of the wide viewing angle, high contrast with the large adjustable LCD backlight function LCD controller. 
 a. Controller Specifications: 
 ? Accuracy: Temperature ± 0.1 ℃ +1 digit 
 ? Resolution: temperature ± 0.1. 
 ? With upper and lower standby and alarm functions. 
 ? Temperature of the input signal of T-type. 
 ? Control parameter settings, automatic calculation. 
 b. screen display function: 
 ? Temperature settings (SV) and actual (PV) value directly displayed. 
 ? Can display the currently running program number, segment time, remaining time and cycle times. 
 ? Temperature program settings to display graphic curve, curve with real-time display program execution. 
 ? A separate program edit screen, enter the temperature and time. 
 ? The screen backlight can be adjusted. 
 ? Screen protection function can be used for regular, TIMER or manually close the set. 
 c. program capacity and control functions: 
 ? Can use the program group: maximum 96 PATTEN. 
 ? Can repeat the command: command of up to 999 times each. 
 ? Procedures adopted chat-style production, with editing, removing and other functions. 
 ? SEGMENTS time setting 0 ~ 99Hour59Min .. 
 ? Have the power program memory, re-start automatically after power and continue the implementation of program features. 
 ? Program execution in real-time display graphical curve. 
 ? With the appointment start and shutdown. 
 ? With the date, time adjustment.